IMPORTANT! - Safety
any equipment that will go onto the desk.
The desk is designed to easily lift and lower 11 lbs (5KG), and MAX Weight Capacity = 35 lbs (16KG).
Two people are required when setting up or moving the desk. The desk must be in tallest position
before moving to the intended surface. If the desk is moved in any other position, it may open causing
instability. Failure to follow these instructions may result in serious personal injury.
During the initial setup, raise the desk to the tallest setting before putting on equipment. Check the
cable lengths, and make sure the cables have slack. Without slack in the cables, equipment may be
damage or personal injury
follow these instructions may result in equipment damage or personal injury.
Keep cables clear of the support structure. Failure to follow these instructions may result in equipment
damage or personal injury.
Raise and lower desk slowly. Raising the desk too quickly may cause equipment on the desk to become
unstable. Failure to follow these instructions may result in equipment damage or personal injury.
If moving the desk to a new location, raise the desk to the tallest setting, and remove the items from
the desk surface. Failure to follow these instructions may result in equipment damage or personal injury.
This desk raises and lowers with air cylinder assistance. This cylinder is under high pressure.
Do not open the cylinder! Do not heat the cylinder! Failure to follow these instructions may result in
serious personal injury.
operation. Failure to follow these instructions may result in serious personal injury
Part List
x1
