Luxor BTT90, Instruction Manual

Page: 12 / 20

12 | ENGLISH
• The lightning flash with arrowhead symbol, within
an equilateral triangle is intended to alert the user
to the presence of un-insulated ‘dangerous voltage’
within the products enclosure that may be sufficient
magnitude to constitute a risk of electric shock to the
persons.
• The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
• Warning: To reduce the risk of electric shock, do
not remove cover. No user serviceable parts inside.
Refer servicing to qualified service personnel.
• Before you connect the appliance: Ensure the
voltage rating on the type plate corresponds to your
mains voltage (type plate is located on the back of
the unit).
• This equipment is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities or lack of experience or
knowledge. They should be given appropriate
supervision and instructions to use the equipment by
a person responsible for their safety.
• Ensure the equipment is not too close to heat
emitting appliances or placed in direct sunlight.
• Do not immerse the equipment in water or any other
liquids.
• This product is not a toy. Never leave the equipment
within reach of children. Close supervision is
required when using this equipment near children.
• Repairs to electrical appliances should only be
performed by qualified personnel.
• Improper repairs may place the user and/or
equipment at serious risk.
• This equipment is intended for household use only
and should not be used for industrial or commercial
purposes.
• Do not operate this appliance with a damaged
plug or cord, after a malfunction or after being
dropped or damaged in any way.
• If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• Do not use this equipment for anything other than its
intended use.
SAFETY INSTRUCTIONS