background image

14

32. Mute switch

Activates the mute function and blinks the power�on indica�
tor  resulting  in  no  sound  generated.  Pressing  this  button 
again  to  set  the  mute  function  to  off  allows  sound  to  be 
generated.

33. Display (display on/off)

Turns off the meter lights. Pressing this switch turns off the 
meter lights.
Pressing this switch again turns on the meter lights again.

*  The value in parentheses indicates the number in “Names 

and Functions”.

33

(1)

(10)

(3)

32

Remote control

The remote control shall be aimed at the remote sensor of 
this unit within the specified angle range shown in the illus�
tration when used.

Dry cell
[How to load batteries]

1.  Put your finger on the battery cover claw located behind the 

remote control. The battery cover can be opened by sliding it 
downwards.

2.  Put 2 AAA batteries in the battery case as shown in the illus�

tration.

3.  Close the battery cover.

*   When the batteries start to lose power, the effective dis�

tance becomes shorter or the unit does not function even 
though the switch is pressed. In such a case, both of the 
batteries  shall  be  replaced  with  new  ones  at  the  same 
time.

*   If the remote control is not used for a long time, the batter�

ies shall be removed from the case.

30°

30°

Effective distance: approx. 5 m

How to Use Remote Control

Remote control (RA-9)

Summary of Contents for L-507u





















Reviews: