Luxman D-10X, Owner'S Manual

Page: 23 / 48

20
SUPER AUDIO CD PLAYER D-10X
Before connecting
Before connecting other devices, connect the jack side of the
accessory power cable to the AC inlet of this unit.
When connecting, turn off the power supply for this unit and
the power supplies of all auxiliary devices to prevent unex-
pected accidents that may be caused by noise.
Connecting to the power supply
Insert the accessory power supply cable plug into an AC out-
let on the wall of the listening room.
How to connect input devices
1. Digital connection from a PC/Mac (Refer to
the connection diagram (A).)
Connect between the USB (A-type) terminal of the PC/Mac
and the USB (B-type) terminal of this unit with a USB cable.
Before connecting this unit to a PC using Windows OS, the
dedicated driver software needs to be downloaded from
LUXMAN website and installed.
Refer to the "Driver Installation Manual" on the LUXMAN
website for detailed information.
With Mac OS, this unit is automatically recognized.
Caution:
Connection between a PC and this unit using a USB cable
should not be performed before the installation of the dedicated
driver software is completed. Failure to observe this may cause
a malfunction.
2. Digital connection from a device such as a
CD player (Refer to the connection diagrams
(B) and (C).)
Connect between the (coaxial or optical) digital output ter-
minal of a CD player, an SACD player, a DVD player or other
such devices and the digital input terminal (COAX/OPT) of
this unit with a coaxial digital cable and an optical digital
cable.
This terminal is a shutter-type optical terminal. Direct the
cable connector correctly when inserting the cable into the
terminal. If the cable connector is inserted forcibly in the
wrong direction, the terminal may be deformed and the
shutter may not be able to close even after disconnecting
the cable.
The optical terminal is mounted as illustrated.
How to connect output devices
1. Unbalanced connection with a device such
as an integrated amplifier (Refer to connec-
tion diagram (D).)
Connect between the analog unbalanced output terminals
(LINE) of this unit and the unbalanced input terminals of a
device such as an integrated amplifier with 2 (L/R) RCA ca-
bles.
2. Balanced connection with a device such as a
pre-amplifier (Refer to connection diagram (E).)
Connect between the balanced analog output terminals
(BAL LINE) of this unit and the balanced input terminals of
a device such as an integrated amplifier with two balanced
XLR cables (L/R).
3. Digital output to a device such as another D/A
converter (Refer to connection diagram (F).)
Connect between the digital output terminal (COAX/OPT)
of this unit and a device such as a D/A converter or a unit
equipped with digital input terminals with a coaxial digital
cable or an optical digital cable.
Lower side
Upper side