VACUUM TUBE CONTROL AMPLIFIER CL-38uC
13
How to Use Remote Control
28. Volume (VOLUME
i
,
o
)
Adjusts the sound volume of the control amplifier. The but-
ton
i
increases the sound volume, while the button
o
decreases the sound volume.
29. Mute (MUTE)
Temporarily mutes the sound. Activation of the mute func-
tion causes the volume indicator on the main unit to blink,
and no sound is generated. Pressing this button again to
cancel the mute function allows sound to be generated.
Remote control (RA-19)
29
28
Remote control
The remote control shall be aimed at the remote sensor of
this unit within the specified angle range shown in the illus-
tration.
Dry cell
[How to load dry cells]
1. Put your finger on the battery cover claw on the rear of the
remote control, and slide the cover downward to open it.
2. Put 2 AAA batteries in the battery case as shown in the illus-
tration.
3. Close the battery cover.
* When the batteries start to lose power, the effective dis-
tance becomes shorter or the unit does not function even
though the switch is pressed. In such a case, both of the
batteries should be replaced with new ones at the same
time.
* If the remote control is not used for a long time, the batter-
ies should be removed from the case.
30°
30°
Effective distance:
approx. 5 meters
