18
How to use Remote Control
Remote controller (RA-22)
1
2
3
5
6
8
7
10
9
11
13
4
12
1. Operation switch (OPERATION)
Turns this unit from the standby state to operation state.
When the main power switch on the rear panel is turned on
to set this unit to the standby state and this switch is turned
on, this unit is set to the operation state.
Pressing this switch again at the operating state turns the
unit to the standby state.
2. Input selector
(LINE-1, LINE-2, LINE-3, LINE-4, LINE-5,
BAL-1, BAL-2)
Selects the unbalanced input terminal or balanced input ter-
minal, both of which are located on the rear panel.
During input selecting operation, input/output muting circuit
is in operation and the unit will be on mute.
3. Monitor switch (MONITOR)
This switch is to activate the monitor input terminal.
ON:
Plays back a source from the recorder.
OFF:
Plays back a sound source selected by the input se-
lector.
By pressing this switch, the monitor switches from on to off.
