Luxier
SP22-SS
Rev. A2 092016
7
Installation
1. Mark the positions of the 2 brackets on
the wall and set a side the panel. (
NOTE:
The distance between the two brackets
should be 800mm or 31.5”)
800mm
31.5”
1”
2. Using a drill with a tile bit, drill the hole
slowly into the tile. Do not drill into any pip-
ing or wiring in the wall. Insert the anchors
into the wall. (
NOTE:
Before installing the
wall anchors, use a small piece of painters
tape or masking tape over the drill area.
This will prevent damages to the tile)
3. Secure the mounting brackets to the
wall.
