4
BSH14-S Rev. 1 6/2020
Luxier USA
Installation
B
A. Shut off water supply at the valves.
Remove the old faucet and clean the
mounting surface for installation of the
new faucet.
D. Use an adjustable wrench to tighten
the water supply hoses. (
IMPORTANT:
Do not overtighten the connections.)
B. Attache the flange and insert the
faucet through the mounting hole on the
countertop.
Flexible water supply line
D
HOT
COLD
A
C
C. Under the sink, slide the washer and
metal washer onto the faucet. Secure
the faucet with the locking nut and
screws to the countertop.
F
F. Remove the aerator with a small coin
or a flat head screwdriver and let the
water run for about 1 minute to clear
any debris in the plumbing system.
Check for leaks at all connections.
Reinstall the aerator to complete the
installation.
(
Note
: Sediments or mineral buildup
will clog the aerator and decrease water
flow. It is recommended to clean the
aerator regularly to maintain proper
water flow.
01. Hex Wrench
02. Setscrew
03. Handle
04. Cap
05. Bonnet
06. Cartridge
07. Body
08. Aerator
09. Shank
10. Flange
11. Rubber Washer
12. Washer
13. Metal Washer
14. Locking Nut
15. Screws (x3)
16. Water Supply Hoses
(non-removable)
17. Pop Up Drain Assembly
E. Remove rubber washer and locking
nut from the drain assembly and slide
the drain into the sink. Install the rubber
washer first and tighten the locking nut
to install the drain.
Rubber Washer
Locking Nut
E
1
2
3
4
5
7
8
9
10
11
12
13
14
15
16
17
6
