LX307
V. 02 – 21/04/2015
4
©Velleman nv
3.
General Guidelines
Refer to the
Velleman
®
Service and Quality Warranty
on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 1" (± 2.5 cm)
in front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the
device.
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
Mechanical wear and LEDs are not covered by warranty.
A qualified technician shall install and service this device.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
This device is designed for professional use on stage, in discos, theatres, etc.
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
There may be some smoke or a particular smell when the device is activated for the first time. This is
normal and any smoke or smell will gradually disappear.
Use the appropriate current and power supply (see Technical Specifications).
Keep this manual for future reference.
4.
Features
The NUXILED 1001 is a powerful LED strobe with 330 x 0.5 W SMD LEDs, which could replace a 1500 W
conventional xenon strobe. The unit can be controlled in 10 independent circular rings, while its segment
control function supports unique strobe effects and creates new types of effects perfect for use on stage.
lightweight die-cast housing special for rental companies
DMX-controlled via 3, 10 or 13 channels for simple or advanced controlling
o
3-channel mode: dimmer, shutter, auto programme
o
10-channel mode: shutter control for each ring (10 segments)
o
13-channel mode: dimmer, shutter, auto programme, shutter control for each ring (10
segments)
pre-programmed stand-alone effects, built-in programmes with speed adjustment, and master/slave
mode
flicker-free (12 kHz)
for indoor use
clear LED display for easy menu setting
