Luxibel LX200Z, User Manual

Page: 7 / 49

LX200Z
V. 01 – 30/04/2013 7 ©Velleman nv
Menu Submenu Options Function
User User program mode
Edit User Max Channel = XX Edit users mode
PAN = CH01
Calibration -Password- =XXX Password: 050
Pan… =XXX Calibrate channel value
Fixture ID Name Name
-Password- Password: 050
PID Code Set PID of RDM
Reload
Default
Basic Reload ON/OFF Basic reload
Program Reload ON/OFF Program reload
---Password--- XXX Password: 050
Private Reload ON/OFF Private reload
All Reload ON/OFF Reload all
Program Play DMX Receive Sets DMX mode
Slave Receive Slave Receive 1,2,3 Choose slave position
Sequence Master / Alone Sets the run sequence
Music Master / Alone Sets music mode
Select Chase Chase Part 1 Chase 1 ~ 8 Chase 1 Select and run auto program
Chase Part 2 Chase 1 ~ 8 Chase 2
Chase Part 3 Chase 1 ~ 8 Chase 3
Edit Chase Chase 1 Chase Test Test
: Step 01 (=SCxxx) Sets beginning scene
Chase 8 Step 64 (=SCxxx) Sets end scene
Edit Scenes Edit Scene 001 Pan,Tilt,… (=XXX) Input manual scene
~ Edit Scene 250 --Fade Time-- (=XXX) Manually sets fading time
--Scene Time-- (=XXX) Manually sets scene time
DMX Input
Input scene from exterior
controler
Scenes
Record
ScXX=>ScXX Auto input scenes
7.2 Stand-alone mode with built-in microphone
In stand-alone mode, the LEDs of the device will synchronize with the music through the built-in
microphone.
To set the device to stand-alone mode:
1. Press <ENTER> until Program is displayed and press <ENTER>.
2. Press <DOWN> until Music highlights and press <ENTER>.
3. Press <DOWN> to select Alone and press <ENTER> to confirm.
4. If necessary, set the microphone sensitivity:
Setting the microphone sensitivity
1.
Press <ENTER> until Set highlights and press <ENTER>.
2. Press <DOWN> until UI Set highlights and press <ENTER>.
3. Press <DOWN> until Mic Sens. highlights and press <ENTER>.
4. Press <DOWN> to change the sensitivity and press <ENTER> to confirm
7.3 Master/slave Mode
The master/slave mode allows connecting several devices to a single master device. All slave devices will
then work synchronously with the master device.
You need to set one device to master mode and all other devices to slave mode.
Master
1.
Connect all devices in series with DMX cables.
2. Press <ENTER> until Program highlights and press <ENTER>.
3. Press <DOWN> until Play highlights and press <ENTER>.
4. Press <DOWN> until Sequence highlights and press <ENTER>.
5. Press <DOWN> to select Master and press <ENTER>to confirm.