Luxibel B EXPO200MCW, User Manual

Page: 11 / 13

11
DMX Chart
Channel
Name Function Min. DMX Max. DMX
1 CH 4 CH 5 CH
1
1 1 Dimmer Dimmer Coarse 0 255
2 2 Dimmer Fine Dimmer Fine 0 255
3 Strobe
Strobe Open 0 5
Strobe effect slow to fast 6 127
Random strobe effect slow to fast 128 255
3 4 Fans Mode
Auto 0 88
Theatre 89 172
High 173 255
4 5 Frequency
600 Hz 0 50
1200 Hz 51 101
2000 Hz 102 152
2400 Hz 153 203
4000 Hz 204 255
Unique features
RDM, stand for “Remote Device Management”, with this function, users can realize remote
control of the device, such as remotely changing DMX address, check a lot of useful
information such as temperature, power consumption, fan speed. Etc. Every single device
has a unique RDM code before left factory to distinguish from each other, usually not
suggest users change this code freely.
Software upgrade function via DMX cable, if there is any new firmware for this device come
out, it can be upgraded simply via a software upgrade box, no need to change any
mechanical parts. The upgrade box is not included in the package, if need any further
assistance please just contact authorized dealers.
Hibernation, the device will enter sleeping mode if activated after a period of disconnecting
DMX signal to save the power consumption, and will return immediately as soon as the DMX
signal is sent again.
Display battery, this function is prepaid in the display PCB, users just need to install a normal
10440 600mAh 3.7V rechargeable lithium battery, then users could power on the display and
do setting without connect to main power.
Display back-up communication IC, there is a back-up communication IC installed in the
display PCB, so users could replace at once if the working one is broken, no need to wait
long time from service.
Display flip, by press up and down button for more than 3 seconds, the display will flip
automatically, this function is useful to read menu conveniently when device is hanged.