Luxibel B Air manual 8
Bedrijvenpark De Veert 13/004, 2830 Willebroek | +32 3 860 73 50 | [email protected] | www.luxibel.com
9. Replacement of the UVC lamp
Luxibel recommends replacing the UVC lamp once a year and each time when its output falls below 80% of initial radi-
ometer reading.
Following steps need to be taken for replacing a UVC lamp:
1. Unscrew 4 bolts from both side of the unit
2. Take off protection grill and air filter on both sides.
3. Unscrew the 4 bolts that hold the bracket
4. Disconnect earth cable from bracket
5. Slide inside lamp holder 50% out until you can acces the lamps:
6. Carefully grasp the glass bulb of the source (use cotton gloves), rotate it about 90° around the
axis and remove from the holders.
7. Insert the new lamp with the dowels into the slots of the holders and rotate it about 90° around
the axis to lock it.
8. Slide unit back inside and reconnect earth cable
9. Install the screws of the bracket
10. Install airfilter and protection grill on both sides
CAUTION:
Always disconnect power to the Product before replacing the UVC lamp.
NOTE:
Use only the original specified spare parts, including Philips UVC lamps. Use of other spare parts may result in
damage to the Product.
10. Repairs
If the Product is damaged or malfunctions, contact the Luxibel Service Department or a Luxibel authorized distributor.
Repairs by parties other than Luxibel or a Luxibel authorized distributor may not involve the use of Luxibel genuine parts
and may affect the safety and functionality of the Product.
For repair options or specific inquiries, please contact the Luxibel Service Department.
