Luxia Poly 1000, Operating And Service Manual

Page: 45 / 132

POLY 1000/1500/2000
Operating and service manual
pag. 45 di 132
English
26 - PROBLEMS AND SOLUTIONS
NOTE: Since most of the operational failures happen because of an incorrect use of
the machine, in the table herebelow are indicated a few possible problems, together
with the possible remedies.
PROBLEM POSSIBLE CAUSE REMEDY
Dirty cups and glasses. • Dirty tank filter. • Clean the dishes properly and
remove all solid remnants before
putting them into the machine.
• Jets clogged up water . • Up clean them.
• Washing water not hot enough. • Check the tank thermostat.
• Inadequate or in • Use detergents recommended by
wrong amounts. the manufacturer ( non foamy )
and in the recommended doses.
• Dishes washed a long time after • Wash the dishes right after the
having been used. use, before they dry.
Alternatively, soak them into
water with no foamy detergents
before putting them into the
machine.
Washing and rinsing arms • The washing arm is impeded. • Make sure that there are no
are not turning. impediments to rotation.
• Low water pressure • Install pump water
pressure booster pump
Dishes with white • Very hard water. • Install a water softener.
spots or streaks. If this is not possible,
dry the dishes by hand.
• Jets clogged up water. • Proceed to clean them up.
• Dirty electromagnetic valve filter. • Remove the loading hose, pull out
the electromagnetic valve filter
and clean it under running water.
• Insufficient water pressure. • Check the water supply system
and if necessary install a pressure
motor pump.
Dishes with lipstick • Insufficient detergent. • Increase the amount of
stains. detergent. In any case,
we recommend to manually
remove any lipstick before
washing.
Dishes with grease stains. • Dried up dirt on the dishes. • Soak the dishes, even in cold
water, right after use or use a
chlorine containing deterge
(consistent) for fowashing.