background image

8

LuxHome Alarm Systems

Manufactured by Everspring

Copyright © 013. All Rights Reserved.

Everspring Industry Co., Ltd.

Website: 

www.everspring.com

Service Support: [email protected]

Disposal and Recycling

Disposal of this product is covered by the Waste Electrical or Electronic Equipment 

(WEEE) Directive.

It should not be disposed of with other household or commercial waste.

At the end of its useful life the packaging and product should be disposed of via 

a suitable recycling center. Please contact your local authority or the retailer from 

where the product was purchased for information on available facilities.

A50111101R  V1.0    013/06

Guarantee

The product is guaranteed for one year from the date of purchase against faulty materials and 

workmanship. No liability can be accepted for any problems caused by fair wear and tear, buyer’s 

negligence,  improper  fitting  or  use,  wilful  or  accidental  damage,  or  any  consequential  loss  or 

damage howsoever caused. This guarantee does not affect your statutory rights and is valid for 

the country or region of your purchase.

If you believe the product to be faulty or in the unlikely event of the product developing a fault 

during the warranty period, then please contact your supplier for product assistance. Product 

repair or replacement will be offered for faulty products only with our prior agreement. Should you 

need to return a product then:

1.  Contact your supplier and obtain a Return Authorisation Number.

.  Adequately package your product to prevent damage in transit and include the following:

a. A copy of your original invoice/receipt.

b. A covering letter giving your full contact details, including email address (if applicable).

c. A description of the fault or problem.

Summary of Contents for LHD100SU









Reviews: