Luxaire TCJD30 THRU 76, Technical Manual

Page: 17 / 30

700678-LTG-E-0415
Johnson Controls Unitary Products 17
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
ACCESSORIES & APPLICATIONS
Refer to Price Manual for specific model numbers.
Long Lineset Applications - For installations with more than
75' of equivalent lineset length, refer to the current version of
the
Piping Application Guide 247077-UAD-H-0209 , available
in the Application Bulletins section on UPGnet.
Off Cycle Timer Delay - Provides a 5-minute off cycle to pre-
vent rapid recycling of the compressor.
TXV Kits - S1-1TVM series thermal expansion valves precisely
meter refrigerant for optimum performance over a wide range of
conditions. See System Charge table for TXV part number for
each model.
Low Ambient Pressure Switch Kit (S1-2LA06700424) -
Allows the use of air conditioning at low outdoor ambient tem-
peratures down to +20°F (-7°C). For use with single-stage
models containing R-410A refrigerant only.
Thermostats - Compatible thermostat controls are available
through accessory sourcing. For optimum performance and
installation, refer to the UPGNET “Low Voltage Wiring Diagram”
document to select and apply controls.
TCJD60S4(3,4)S4(E)
T*(8,L)C*C20 21.0 FC/MC/PC60D 1600 54.0 37.6 13.25 11.25
T*(8,L)C*C20 21.0 FC/MC62D 1620 55.0 39.1 13.50 11.25
T*(8,L)C*C20 21.0 FC64D 1630 57.0 40.6 14.00 11.75
T*(8,L)C*C20 21.0 UC60C 1605 54.0 37.6 13.25 11.25
T*(8,L)V*C20 21.0 FC/MC/PC60D 1600 54.0 37.6 13.25 11.25
T*(8,L)V*C20 21.0 FC/MC62D 1620 55.0 39.1 13.50 11.25
T*(8,L)V*C20 21.0 FC64D 1630 57.0 40.6 14.00 11.75
T*(8,L)V*C20 21.0 UC60C 1605 54.0 37.6 13.25 11.25
T*9(C,V)*C20 21.0 FC/MC62D 1655 55.0 39.1 13.25 11.00
T*9(C,V)*C20 21.0 FC64D 1655 57.0 40.6 13.50 11.25
T*9(C,V)*D20 24.5 FC/MC62D 1630 55.0 39.1 13.25 11.00
T*9(C,V)*D20 24.5 FC64D 1630 57.0 40.6 13.50 11.50
TM8X080C16MP11 21.0 FC64D 1550 56.0 39.2 13.25 11.25
TM8X100C16MP11 21.0 FC64D 1550 56.0 39.2 13.25 11.25
TM8X100C20MP11 21.0 FC64D 1600 56.5 39.7 13.50 11.50
TM8X120C20MP11 21.0 FC64D 1600 56.5 39.7 13.50 11.50
TM9E100C20MP11 21.0 FC64D 1550 56.0 39.2 13.25 11.25
TM9E120D20MP11 24.5 FC64D 1525 56.0 39.2 13.25 11.25
TM9X100C20MP11 21.0 FC64D 1550 56.0 39.2 13.25 11.25
TM9X120D20MP11 24.5 FC64D 1525 56.0 39.2 13.25 11.25
TMLX080C16MP11 21.0 FC64D 1550 56.0 39.2 13.25 11.25
TMLX100C16MP11 21.0 FC64D 1550 56.0 39.2 13.25 11.25
TMLX100C20MP11 21.0 FC64D 1600 56.5 39.7 13.50 11.50
TMLX120C20MP11 21.0 FC64D 1600 56.5 39.7 13.50 11.50
L*(8,L)C*C20 21.0 FC/MC/PC60D 1600 54.0 37.6 13.25 11.25
L*(8,L)C*C20 21.0 FC/MC62D 1620 55.0 39.1 13.50 11.25
L*(8,L)C*C20 21.0 FC64D 1630 57.0 40.6 14.00 11.75
L*(8,L)C*C20 21.0 UC60C 1605 54.0 37.6 13.25 11.25
L*9C*C20 21.0 FC/MC62D 1655 55.0 39.1 13.25 11.00
L*9C*C20 21.0 FC64D 1655 57.0 40.6 13.50 11.25
L*9C*D20 24.5 FC/MC62D 1630 55.0 39.1 13.25 11.00
L*9C*D20 24.5 FC64D 1630 57.0 40.6 13.50 11.50
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
COIL
MODEL
1
COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
TOTAL SENS.
13 SEER AC WITH HIGH EFFICIENCY MOTOR FURNACES
2
Application Limits
Maximum Lineset Equivalent Length 75 Ft
Outdoor Ambient Temperature Limits
Cooling Operation
Maximum DB 115°F
Minimum DB 50°F