LuxaFlex PowerView Pebble Remote, Reference Manual, Page: 15 / 43

3 2
3 2 1
1
[ 29 ] [ 28 ]
CONTENTS
PowerView® Repeaters
Pairing a Repeater to a Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Pairing a Repeater to a Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Using Repeaters with the PowerView® App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Using Repeaters in the PowerView® App: Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Using Repeaters in the PowerView® App: Automations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Pairing a Repeater to a Remote
Repeaters extend the range of the PowerView® Shade Network . Use
Repeaters to ensure commands sent from the PowerView® Pebble® Remote,
the PowerView® Surface, or the PowerView® Hub reach PowerView® window
coverings in large rooms or multiple room applications .
NOTE: A Generation 1 (Generation 1) Repeater Kit comes packed with a USB
power source .
NOTE: A solid green light will
illuminate on the Repeater to
indicate that it is receiving power
and ready to join a network .
NOTE: This puts the remote in
Programming Mode .
PRESS
and
HOLD
n
(Stop)
on the
PowerView® Pebble® Remote until
indicator lights on the interior of the
remote blink .
PRESS
and
HOLD
n
(Stop)
on the
PowerView® Pebble® Remote until
indicator lights on the interior of the
remote blink .
ASSEMBLE
Repeater Kit .
PLUG
the
Repeater into an electrical outlet .
For Generation 1 Repeaters
For Generation 2 Repeaters
NOTE: The solid green light on the
Repeater will go out, indicating it
has been paired to the remote .
HOLD the remote in close
proximity to the Repeater.
PRESS
n
(Stop) on the remote while
the remote is in Programming Mode .
NOTE:
The Repeater will flash
amber .
NOTE:
This puts the remote in
Programming Mode .
PRESS
and
HOLD
n
(Stop)
on the
PowerView® Pebble® Remote until
indicator lights on the interior of the
remote blink .
PLUG
the Repeater into an electrical
outlet .
NOTE:
The Repeater will stop
flashing .
HOLD the remote in close
proximity to the Repeater.
PRESS
n
(Stop)
on the remote while
the remote is in Programming Mode .
GEN 1 GEN 2
RELATED TOPICS