70
GB
V_01/08/2010
Chain catcher
The chain catcher serves to catch a torn saw chain or one which has
jumped out of the guide. Through regular maintenance of the saw rail
and correct and regular tensioning of the saw chain, accidents of this
type can be prevented.
Rear hand guard
The rear hand guard serves to protect the hand against a jumped chain
and disturbing branches and twigs.
Check before starting!
Check the safety equipment and the safe condition of the device.
– Check all parts for their firm fit.
– Check whether there is any leakage.
– Check whether there are visible defects: broken parts, cracks, etc.
– Check the device for correct chain tensioning.
Starting the device
– Hold the device fast with both hands.
– Press the switch-on safety lock (5).
– Press the start button (6).
The device starts up.
Danger!
Risk of injury!
The device must only be put into operation if no faults are found. If any part of the device is
defective, it must be replaced before the next use.
Kettensaege_Akku_467351.book Seite 70 Mittwoch, 25. August 2010 10:19 10
