Lux Tools ABS 14,4 Li electronic, Operating Instructions Manual

Page: 16 / 112

Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety information
Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1)
1. Torque selector
2. Battery capacity indicator
3. Changeover
switch
4. ON/OFF switch
5. Battery pack
6. Battery charger
7. Selector switch for 1st/2nd gear
8. Pushlock
button
9. Quick-change drill chuck
10. LED lamp
3. Proper use
The cordless drill/screwdriver is designed for
tightening and undoing screws, as well as for drilling
in wood, metal and plastic.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Voltage supply 14.4 V d.c.
Idling speed: 0-280/0-1200 rpm
Torque settings: 23+1
Forward and reverse rotation yes
Chuck clamping width max. 10 mm
Battery charging voltage 21 V d.c.
Battery charging current 450 mA
Mains voltage for charger 230 V ~ 50 Hz
Weight 1.62 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level 72 dB(A)
K
pA
uncertainty 3 dB
L
WA
sound power level 83 dB(A)
K
WA
uncertainty 3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Drilling in metal
Vibration emission value a
h
≤
2,5 m/s 2
K uncertainty = 1,5 m/s 2
Screwing without hammer action
Vibration emission value a
h
≤
2,5 m/s 2
K uncertainty = 1,5 m/s 2
16
GB
Anleitung_ABS_14_4_Li_SPK7:_ 27.12.2010 10:39 Uhr Seite 16