Lux Tools 468404, Original Instructions Manual

Page: 37 / 100

37
If you are unable to remedy the fault yourself,
please contact your local OBI store. Please
be aware that any improper repairs will also
invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
Appliances which are labelled with
the adjacent symbol must not be dis-
posed of in household waste. You
must dispose of such old electrical
and electronic equipment separately.
– Please check with your local authority
about the possibilities for correct dis-
posal.
Through separate disposal you send old
equipment for recycling or for other forms of
re-use. You will thus help to avoid in
some cases that damaging material gets into
the environment.
Disposal of the packaging
The packaging consists of card-
board and correspondingly marked
plastics that can be recycled.
– Make these materials available for recy-
cling.
Technical data
*) The specified values are emission values and
do not necessarily represent safe workplace
values. Although there is a correlation between
emission and immission levels, this cannot be
used to infer whether additional safety meas-
ures are necessary or not. Factors which affect
the current immission levels at the workplace,
include the type of room, other sources of
noise, e. g. the number of machines operating
and other processes taking place in the vicinity.
Permitted workplace values can differ from
country to country. This information is designed
to help the user to better assess the dangers
and risks.
**) The specified vibration emission value was
measured in accordance with a normed test
procedure and can be used in order to compare
one tool with another. The specified vibration
emission value can also be used for an intro-
ductory evaluation of the exposure. The vibra-
tion emission value may fluctuate from the
specified value during actual use of the power
tool. These fluctuations will depend on the way
in which the power tool is used. Try to keep
vibrations to a minimum. One method of reduc-
ing the vibration load is, for example, limiting
the length of time you work with the tool. All
parts of the operating cycle must be taken into
account for this purpose (for example, also
Device does not clear
any snow. Screw or discharge chute clogged?
►
Rectify clogging – p. 35
V-Belts loose or torn out? Contact your local OBI store.
Excessive vibration. Loose parts or damaged screws?
Fault/malfunction Cause Remedy
Material number 468 404
Rated voltage 230 V~, 50 Hz
Rated output 1800 W
Max. rpm 2150 min
−1
Protection class II
Degree of protection IPX4
Working width 450 mm
Max. clearing height 250 mm
Max. clearing capacity 180 m³/h
Max. throwing range 6 m
Sound power level (L
WA
)* 100 dB(A)
(K = 2 dB(A))
Sound pressure level
(L
PA
)*
90 dB(A)
(K = 2 dB(A))
Vibration** < 1.97 m/s²
(K = 1.5 m/s²)
Mains impedance Z
max
*** 0,305 Ω
Weight 15.2 kg
Filament bulb for head-
lights G4, 12 V, 20 W
Material number 468 404
GB
Schneefraese_468404.book Seite 37 Donnerstag, 15. Mai 2014 6:59 06