Lux Tools 301 598, Original Instructions Manual

Page: 10 / 24

10
– Turn the torque regulator (2) into position [ ] .
– Hold the device straight and drill with even pres-
sure.
Screwdriver action
– Set the required torque using the torque regula-
tor (2).
– Keep the device in a straight line to the screw.
Cleaning
Cleaning and maintenance at a glance
Regularly and according to the operating condi-
tions
Troubleshooting
What to do when something doesn’t work…
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the
vendor. You will save yourself a lot of trouble and
possibly money too.
If you can’t fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
Appliances which are labelled with the adja-
cent symbol must not be disposed of in
household waste. You must dispose of such
old electrical and electronic equipment sep-
arately.
– Please check with your local authority about the
possibilities for correct disposal.
– Remove all batteries and battery packs before
disposal.
Through separate disposal you send old equipment
for recycling or for other forms of re-use. You will
thus help to avoid in some cases that damaging
material gets into the environment.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.
Disposal of batteries and accumulators
Disused batteries and accumulators do not
belong in domestic refuse; they must be dis-
posed of as prescribed by regulations.
– Bring batteries which are no longer usable to the
battery collection point of the dealer or of your
local authority.
– Do not burn accumulators. Risk of explosion!
Technical data
NOTICE! Risk of damage to the unit!
Never use the drill for chasing or to expand
drilled holes.
Note: Always use a drill appropriate to the
material.
Note: Always use the screw bit designed
for the screw. If you use the incorrect bit,
you may damage the head of the screw.
What? How?
Clean the ventilation slots
of the motor to remove
dust. Use a vacuum, cleaning
brush or paint brush.
Clean the device. Wipe the unit with a damp
cloth.
DANGER! Exercise caution – risk of
injury!
Unprofessional repairs may mean
that your unit will no longer operate safely.
This endangers you and your environment.
Error/Fault Cause Remedy
Device does not work. Is the device defective? Contact your local vendor.
Battery pack discharged?
►
Charging the battery pack – p. 8.
Battery pack defective? Contact your local vendor.
Tool holder does not turn. Is the rotation direction switch set
to the centre setting?
►
Changing the rotation direction – p. 9.
Part number 301 598
Battery-powered screwdriver
Idle revolutions 0–350 /
0–1300 min
-1
Max. torque 18 Nm
Max. drill chuck diameter 10 mm
Noise output level (L
WA
)* 74,2 dB(A)
(K = 3 dB(A))
Noise pressure level (L
WA
)* 63,2 dB(A)
(K = 3 dB(A))
Vibrations < 0,68 m/s²
(K = 1.5 m/s²)
Battery charger
Rated voltage 230 V~, 50 Hz
Capacity 45 W
Charge voltage 12 V
Charge current 3 A
Protection class II
Battery pack
Battery pack type Li-Ion
Rated voltage 10.8 V
GB
Akkuschrauber_301598.book Seite 10 Donnerstag, 7. April 2016 10:32 10