SET DAY AND TIME:
Place the System Mode switch into the OFF position. Press
the SET button one time and the backlight will illuminate; press the SET button
again and the room temperature will disappear from the screen and the day icon
will flash. With the day flashing, press UP or DOWN to adjust the day of the week
shown on the screen. Pressing NEXT will advance from setting the day to setting
the clock, with the time now flashing. Use UP or DOWN to set the time, making
sure the proper AM/PM indication is correct. Holding the UP or DOWN buttons
will make the clock digits scroll rapidly. The thermostat will exit the day/time
adjustment mode if either the SET or NEXT buttons are pressed, or there are no
button presses for approximately 10 seconds.
HEATING AND COOLING
: Basic operation of your heating or cooling system can
be obtained by choosing either HEAT or COOL with the System Mode switch. The
temperature can be adjusted using the UP and DOWN buttons. When the
thermostat is first powered up, it will follow a default temperature routine that is
preset from the factory (shown below).
2-PERIOD CONFIGURATION:
4-PERIOD CONFIGURATION:
20
PERIOD
MORN
DAY
EVE
NITE
HEAT MODE
6:00 AM 70
°
F (21
°
C)
8:00 AM 62
°
F (17
°
C)
6:00 PM 70
°
F (21
°
C)
10:00 PM 62
°
F (17
°
C)
COOL MODE
6:00 AM 78
°
F (26
°
C)
8:00 AM 82
°
F (28
°
C)
6:00 PM 78
°
F (26
°
C)
10:00 PM 75
°
F (24
°
C)
PERIOD
DAY
NITE
HEAT MODE
6:00 AM 70
°
F (21
°
C)
10:00 PM 62
°
F (17
°
C)
COOL MODE
6:00 AM 78
°
F (26
°
C)
10:00 PM 75
°
F (24
°
C)
OPERATING INSTRUCTIONS:
All manuals and user guides at all-guides.com
