10
INTRODUCTION
Thank you for purchasing the Luvion Eco Fast Deluxe bottle warmer. Make sure you always keep
your original proof of purchase. For warranty cases you will always be asked to show a copy of
your proof of purchase. For warranty claims you can contact the Luvion dealer or the local Luvion
representative. More information can be found at www.luvion.com
This manual contains all the information you need, to be able to use this Luvion Eco Fast Deluxe
bottle warmer safely and with pleasure. Before using the bottle warmer, we recommend that you
read this manual carefully. We ask for your extra attention for the safety instructions.
ATTENTION!
•
Always check the temperature of the food or milk before serving. This in order to ensure it
has reached the feeding temperature;
•
Always place the basket in the chamber to heat up bottles or baby food;
•
It is advised to stir well to spread the heat evenly of the content in order to get the desired
temperature;
•
The bottle should be placed in the bottle basket, with the ring slightly loosened;
•
Allow the bottle warmer to cool for approximately 15 minutes between uses. Never touch
the inside of the chamber during or just after operation.
•
For safety reasons, this unit stops working automatically when the water dries off .
•
When heating bottles, it should be placed in the bottle basket. It should not be placed
directly into the heating plate under the bottle.
•
Make sure to clean all included accessories before use.
IMPORTANT SAFETY PRECAUTIONS
Please note the following precautions before usage. Failure to comply may be dangerous.
•
Read all the instructions before using the product;
•
Place the bottle warmer on a fl at and dry surface;
•
Never use the bottle warmer without water in it; change the water in the bottle warmer
frequently for hygienic reasons;
•
Do not touch the hot surfaces;
•
This product is not a toy. Please keep the unit out of reach of children or with close
supervision when this product is used near children;
•
Disconnect the bottle warmer from the power supply before adding water;
•
Always unplug the bottle warmer and remove the bottle from the product before feeding
the baby;
•
Turn off the bottle warmer and disconnect from power supply after use;
•
Rinse the excessive water and wipe the bottle warmer with a soft cloth;
•
The appliance is for indoor use only;
•
Please do not expose this product to moisture or heat sources;
•
At the end of the product lifecycle, the bottle warmer should be brought to a collection
point for the recycling of electrical and electronic equipment.
