Cleaning
P/11
Cleaning:
It is necessary to clean the Meat Slicer at regular intervals as perishable food
scraps could accumulate on the Meat Slicer and Cutting Blade.
Before cleaning the Meat Slicer, make sure it is off. Pull the plug out of the
electrical socket and set the Variable Thickness Dial to the “0” setting.
Do not immerse the Meat Slicer in water.
Remove the Safety Food Holder and clean it in warm soapy water, then rince.
Do not clean using a dishwasher.
Wipe the Housing and Sliding Food Guide using a slightly damp soapy cloth.
Do not use any scouring pads or hard brushes.
Removing the Cutting Blade:
Rotate the Blade Locking Piece clockwise from the blade centre and then pull out
the blade. When taking out the blade make sure that you handle it by the centre.
Wash it by hand in warm soapy water.
Do not clean using a dishwasher.
Clean the housing behind the blade with a dry cloth or a soft brush.
Danger of injury: The Cutting Blade is very sharp!
Figure 1
.
If necessary remove the ‘
Quick Release’
Sliding Food GuideBar
for a more
thorough clean. Push the button as
shown in
Figure 1,
and remove
the Sliding Food Guide Bar. Before
operating the Meat Slicer again make
sure the Sliding Food Guide Bar has
been reinstalled correctly and the
Sliding Food Guide is sliding smoothly.
Summary of Contents for Razor LRMS180W
Page 1: ......
Page 2: ...Congratulations on the purchase of your new Luvele Razor Meat Slicer...
Page 13: ......
