Luvata ECO EVS, Technical Manual, Page: 5 / 18

English
11
www.luvata.com
Proper access to model
Casing
Fan shroud
Electric heater
Heater clip
Preliminary assembly
1. Install condensate drain connection “A” with relative rubber washer.
2. “EVS” - “EVS-ED” series: connect heater and motors through one of the knockout entries; use rubber fairlead supplied as to avoid
possible damage to wiring.
3. “EVS/B” - “EVS/B-ED” series: heater and motors prewired in junction box; use the the knockout entries and rubber fairlead for the
electric connections.
4. Use screws “C”, washers “D” and rubber washers “E”, as per drawing, to close and fasten fan shroud.
Access
1. Disconnect condensate drain connection so that it does not hamper with opening/closing of fan shroud.
2. Loosen knurled fastening screws “F” and unscrew the fastening screws “C” of the fan shroud.
3. Bring fan shroud to the position shown in drawing.
Remounting
1. Position fan shroud ensuring that the casing is inside, tighten knurled screws “F” and fasten with screws “C”.
2. Reconnect the condensate drain connection.