Lutz NG10, Manual

Page: 11 / 36

11
0698-701 Relay module - 04/2021
en
NOTICE
The electromagnetic compatibility of the device is compatible with the emitted interference and
interference immunity for residential and industrial areas.
► The system must not be operated in the immediate vicinity of strong electromagnetic fields (e.g.
large motors, transformers) or interference sources that are connected to the mains (e.g. frequency
converters).
► To avoid interfering influences when setting up a decentralised installation of individual modules, only
use original data cables and route the data cables away from low-voltage lines, electrical machines and
switching elements.
NOTICE
If you connect the relay module to an incorrect power supply or connect incorrect electrical loads,
the relay module may become damaged!
► Observe the information under 'Technical Data' and on the rating plate.
If the product and the supplied accessories are integrated into a separate system or used for purposes
other than the intended use, the user must check the suitability and permissibility at his own responsibil-
ity. Product use not confirmed in writing by the manufacturer absolves the manufacturer of any liability.
The manufacturer is not liable for consequences of incorrect treatment, use, maintenance, servicing and
operation of the appliance, as well as normal wear and tear. The same applies if faults arise from inter-
vention or configurations on the part of the user not confirmed by the manufacturer.