background image

7

0697-501 MA/MI - 12/2020

en

Personnel qualification

•  This device must not be used by children. It may be used by persons of reduced physical, sensory or 

mental capacity or by persons lacking in experience or knowledge provided that they are supervised 

or have been instructed in the safe use of the device and understand the associated hazards. Cleaning 

or user maintenance must not be performed by children. 

•  Ensure that personnel tasked with work on the motor have read and understood these instructions and 

all associated applicable documents, particularly safety, maintenance and servicing information, before 

they start work.

•  Clarify responsibilities, competencies and monitoring of the personnel.

•  Ensure that all work is carried out by technical qualified personnel only:

 -  Assembly, servicing, maintenance work

 -  Work on the electrics

•  Personnel to be trained must only work on the motor under the supervision of technical personnel.

•  Personnel holding the motor in their hands during operation will be subjected to vibrations. The upper 

limbs are exposed to an acceleration of less than 2.5 m/s².

Statutory warranty

•  During the guarantee period, obtain the manufacturer's permission for modifications, maintenance 

work or alterations.

•  Use only original parts.

Duties of the personnel

•  Observe the notices on the motor and maintain them in a legible state.

•  Use protective equipment where necessary.

•  Only perform work on the motor during downtime.

•  Ensure that the motor is disconnected before you carry out assembly and maintenance work.

•  After completing all the work on the motor, remount the safety devices in accordance with specifications.

Summary of Contents for MA II

















Reviews: