5-5 To show the balance data numbers in the memory
( Lower display show " SPACE " )
The display will show the balance data no. that exist
into the memory ( allow memorize data no. ).
5-6 Clear the existing saving data from the memory
( Lower display show " CLr " )
a. Use " button " ( 3-3, Fig. 1 ) to select " YES " or " no ".
▲
* YES : It will execute the memory clear function..
* no : It will be not to clear the memory.
b. If select " YES ", press the " Enter button " ( 3-4, Fig. 1 )
again will clear the memory exactly.
5-7 Code entering for the further calibration usage
( Lower display show " CodE" )
The upper display will show 100.
The code setting is used for the further calibration usage.
It do not enter any new code, just press the " Enter button
" ( 3-4, Fig. 1 ) will finish the Advanced Setting Procedure.
13