Lutron Electronics TM-925, Operation Manual, Page: 14 / 20

5-1 Change thermocouple type to type K or type J
a. Use " button " ( 3-3, Fig. 1 ) to select " K " or " J ".
▲
b. After select the desiring value ( K or J ), press the
" Enter button " ( 3-4, Fig. 1 ) to save the data with
default.
5-2 Change the Temp , unit
℃ ℉
a. Use " button " ( 3-3, Fig. 1 ) to select " " or " ".
▲ ℃ ℉
b. After select the desiring value ( or ), press the
℃ ℉
" Enter button " ( 3-4, Fig. 1 ) to save the data with
default.
5-3 Auto power On/Off
( Lower display show " OFF " )
a. Use " button " ( 3-3, Fig. 1 ) to select " YES " or " no ".
▲
* YES : Auto power off.
* no : Auto power disable,
b. After select the desiring function ( YES or no ), press the
" Enter button " ( 3-4, Fig. 1 ) to save the function with
default.
5-4 Change the data logger sampling time
( Lower display show " SP-t " )
a. Use " button " ( 3-3, Fig. 1 ) to select
▲
data logger sampling time to
0, 1, 2, 5, 10, 30, 60, 600, 1800, 3600 seconds
b. After the sampling time value is determined, press the
Enter button " ( 3-4, Fig. 1 ) to save the sampling
time with default.
Note :
Set the sampling time to 0 second is used
for the manual Data Logger function.
12