5-3 Manual Datalogger ( Set sampling time = 0
second )
a. Set sampling time is to 0 second
Press the " LOG Button ( 3-8, Fig. 1 ) > 3 second , the
lower LCD will show the " Position no. " , then press the
" LOG Button " ( 3-8, Fig. 1 ) once, the " REC " symbol
will flashing once and Beeper will sound once, at the
same time the measuring data along the time
information will be saved into the memory circuit.
Remark :
During execute the Manual Datalogger, it can use the "
▲
Button " ( 3-5, Fig. 1) or " Button " ( 3-7, Fig. 1 ) to
▼
set the measuring position ( 1 to 99, for example room 1
to room 99 ) to identify the measurement location , the
lower Display will show P x ( x = 1 to 99 ).
( x = 1 to 99 ).
b. Finish the Datalogger
During execute the Datalogger function, press the " LOG
Button ( 3-8, Fig. 1 ) > 1.5 SECONDS continuously again will
finish the Datalooger function, the Position no. " PXX " will
be disappeared and finish the Datalogger. function.
5-4 Check time information
During the normal measurement ( not execute the
Datalogger ), If press " TIME Button " ( 3-6, Fig. 1 ) )
once , the lower LCD display will present the time
information of Year/Month, Date/Hour, Minute/Second
and the Sampling time information in sequence.
13
