Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
Made and printed in the U.S.A. 1/04 P/N 044-040 Rev. A
LIMITED WARRANTY
Lutron will, at its option, repair or replace any unit that is defective in materials or manufac-
ture within two years after purchase. For warranty service, return unit to place of purchase or
mail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid. Telephone
the Lutron Technical Support Center toll free at 800-523-9466. After the two year period, a
pro-rated warranty applies to this product until eight years after the purchase. For more infor-
mation regarding this warranty contact your Lutron representative.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THE
IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO TWO YEARS FROM PUR-
CHASE. THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION,
REMOVAL OR REINSTALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE,
OR IMPROPER OR INCORRECT REPAIR, OR DAMAGE FROM IMPROPER WIRING OR
INSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES. LUTRON’S LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUT
OF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY,
OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. Some states do not allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you. Some states do not allow the exclusion or limi-
tation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you.This product may be covered by one or more of the following U.S. patents:
4,835,343; 4,924,349; D422,567; D436,930; D453,742; D456,783; D461,782; D465,460;
D465,770; D466,090; D466,091; D466,484; D475,024; D475,025 and corresponding foreign
patents. U.S. and foreign patents pending. Lutron, Claro, and RadioRA are registered trade-
marks and Satin Colors and seeTouch are trademarks of Lutron Electronics Co., Inc.
© 2004 Lutron Electronics Co., Inc.
Technical and Sales Assistance
If you need assistance, call the toll-free
Lutron
Technical Support Center
. Please provide exact
model number when calling.
(800) 523-9466 (U.S.A., Canada and the Caribbean)
Other countries call:
Tel: (610) 282-3800
Fax: (610)
282-3090
Visit our Web site at www.lutron.com
1.
Remove wallplate and wallplate adapter from
Master Control (if applicable).
2.
Remove currently installed button kit (if applicable).
Remove button kit from Master Control by gently
prying it from the top. See Button Kit Removal.
3.
Snap on the button kit by lining up the two tabs on
the bottom of the button kit with the two slots in the
Master Control just above the lower Master Control
mounting screw. Using your thumbs, press in the
bottom, and then snap in the top of the button kit.
4.
Attach Lutron Claro
®
or Satin Colors
TM
wallplate
adapter and wallplate.
a. Loosely install Master Control mounting
screws.
b. Tighten wallplate adapter mounting screws
snug.
c. Tighten Master Control mounting screws
until wallplate adapter is flush to wall (do
not over-tighten).
d. Snap wallplate onto wallplate adapter, and
verify that button kit is not submerged.
e. If button kit is submerged, loosen mounting
screws appropriately.
Installation
Using a small
flat blade
screwdriver,
gently pry
from top.
Button Kit Removal
Mounting Diagram
Button
Kit
Master
Control
Wallbox
Master Control
Mounting
Screws
Adapter
Mounting
Screws
Wallplate/Adapter purchased
separately.
