R
S p e c i f i c at i o n S u b m i t ta l
page
Job Name:
Job Number:
Model Numbers:
QS System
QSE-IO
Control Interface
369374a 1 08.07.12
QSE-IO Control Interface
The QSE-IO contact closure interface provides
integration with third-party equipment requiring
contact closure input/output, including occupancy
and vacancy sensors; motorized projection screens,
skylights, and window shades; AV equipment; security
systems; movable partition walls; and timeclocks. One
QSE-IO interface provides five (5) dry contact closure
outputs.
For complete functionality, programming
instructions, and detailed DIP switch settings, see
the QSE-IO Programming Guide, PN 040391,
at www.lutron.com/qs.
Key Features
• Integrates a GRAFIK Eye
®
QS control system
with equipment that has contact-closure I/O
• Provides five inputs and five dry contact closure
outputs.
• Provides both normally open (NO) and normally closed
(NC) contacts.
• May be programmed to control or be controlled by
any combination of GRAFIK Eye
®
QS control units or
control any combination of Sivoia
®
QS window
treatments on the QS link.
Compatible Components
The following devices are compatible with the QS link.
For more information on each, refer to
www.lutron.com/qs.
• GRAFIK Eye
®
QS control units
• seeTouch
®
QS wallstations
• Sivoia
®
QS shades
• QS Interfaces (contact closure, Ethernet/RS232)
• Quantum
®
system
• Energi Savr Node
TM
units
• QS Sensor Module
• QS Keyswitch
For Programming, see the
QSE-IO Control Interface Programming Guide:
PN 040391 at www.lutron.com/qs
Requirements
• QS Link Power Supply, such as a:
- GRAFIK Eye
®
QS
- QS Link power supply, such as the QSPS-P1-1-50
- Energi Savr Node
TM
QS
- Quantum
®
light management hub
• QS Communication Link (IEC PELV/NEC
®
Class 2)
(see QS Link Wire Sizes table)
