3
Operations and Maintenance Manual
®
Expertise in LED control and dimming:
• Through the LED Center of Excellence, Lutron
R
tests new LED fixtures and bulbs on an ongoing basis and has
the widest compatibility list in the industry
• Lutron
R
Phase adaptive dimmers can accommodate different types of loads on the same unit (different
channel). Auto selects based on type of load unit senses and can also be set manually.
• Lutron
R
offers guaranteed compatibility with Lutron LED drivers when dimming
• Ecosystem
R
and DALI load types (for ‘plus’ projects)
– Fixture by fixture control
– Lights track together, not dependent on which 0–10 driver being used
– Extensive driver and lamp feedback
– Digitally addressable fixtures can be wired without regard to zoning
– Alerts and alarms for facility maintenance
• RTISS technology provides stable phase control dimming under industry widest range of common noise types
found in hotels.
Advanced sensor technology
• Available in multiple form factors
• Enhanced with XCT
T
technology for increased sensitivity
• Easy installation with guaranteed 10 year battery life
Lutron
R
Clear Connect
R
Wireless Technology:
• Lutron
R
uses Clear Connect
R
for RF communications. Clear Connect
R
operates in a protected frequency
band (434MHz in the US, 868MHz in Europe) and avoids the crowded 2.4GHz band of many competing
technologies. This ensures trouble free communications and an excellent experience for the guest – the
controls work the first time, every time.
• Using Clear Connect
R
, Lutron
R
offers wireless sensors and controls. These devices all have a 10 year battery
life. Being wireless, these devices allow for easy mounting, installation, and relocation.
Lutron Guest Presence Detection for energy savings
• A very important feature of the myRoom
T
system – in either prime or plus – is guest presence detection. By
combining door open / close, occupancy sensor and button press information in the space, the system knows
when a guest is in the space, versus when everyone has left the space. If a guest is present in the space, the
system turns over control to the guest – never again have your sleeping guest wake up because the thermostat
sensor in the room stopped seeing him.
Shading Systems:
• Access to many preset stopping positions – more than open / close / stop.
• Ultra quiet low-voltage electronic drive units.
• Roller shades have intelligent hembar alignment to maintain a clean façade
• Direct connection from controllers / keypads to shades reduces number of devices to design, install, program
and maintain.
• Pull to start functionality with draperies are intuitive for the guest
