9
Operations and Maintenance Manual
®
Section 5:
Lutron
R
and myRoom
T
System Overview
(continued)
Privacy and Doorbell Control:
Signage (by Lutron or others) outside the room will indicate room status with a
Red LED for Privacy, and a Green LED for Service. When “Privacy” is activated, the doorbell will be disabled so
as not to disturb your guest.
Occupancy:
Occupancy timeout will be 15 minutes. Occupancy will affect the whole room together.
Occupancy of the room is defined by the guest presence detection algorithm.
Window/Balcony Door Contact Integration:
The HVAC will shut off when window/balcony door is open and
will resume operation when the window/balcony door is closed.
Property Management System (PMS):
To provide the maximum energy savings for guestrooms, it is necessary to put unrented rooms into a deep
energy saving mode. This is done with a temperature setback, all lighting off, and drapes closed. The Lutron
R
system receives this information from the hotel’s PMS.
The Lutron
R
PMS interface interprets guest check-in and check-out information, HVAC data, message lights,
privacy, and housekeeping for ‘do-not-disturb’
Building Management System (BMS):
The Guestroom control unit is BACnet
R
Testing Laboratories (BTL) certified to allow for seamless integration
betwen myRoom and the BACnet
R
system in the hotel. BACnet
R
enables the BMS to control, monitor and
manage lights, shades, devices, and HVAC systems in the guestrooms. This allows for a single, familiar user
interface for your entire building. The information available through the myRoom
T
system includes light levels
(on/off/level), shades levels (open/closed/level), room temperature, temperature setpoints, thermostat alarms,
lighting and HVAC power data, device statuses and much more.
