6 -2 Symbols & units of display
Symbol &
Function
Unit
u
Ω
,m
Ω
,
Ω
Ohm unit
.)))
Appears on the "BEEP" function have
started.
HOLD
Appears on the"HOLD" function have
started.
GOOD
It is pass Q.C. Appears on finished
compare operate.
FAIL
It is higher or lower than maximum or
minimum acceptance value . Appears
on finished compare operate.
COMP
Appears on the"COMPARE" function.
L
Appears on the"INDUCTIVE" mode.
H I
Appears to showing H I limit.
LO
Appears to showing LO limit.
6 -3 Resistance Measurement
1) Power on the instrument by rotate the "Power /
Range rotary switch" ( 3-10, Fig. 1 ) to exit the " OFF "
position and then select measuring range from 60000 u
Ω
to 6000
Ω
according to your requirement.
Note :
* Always select the highest range ( 6000
Ω
) if you don't know the resistance value of
the resistor and then select lower range
in sequence.
* At 60000 u
Ω
( 10A )must use DC 9V
adapter from socket ( 3-17, Fig. 1 ).
* Over range LCD shows " ----- ".
* Can't measure the resistance value, LCD
will show 0.0000, 0.000 or 0.00.
6
