Maestro
®
Sensor
369741a 1 11.15.12
®
S P E C I F I C AT I O N S U B M I T TA L
Page
Job Name:
Job Number:
Model Numbers:
Switch with Occupancy/ Vacancy Sensor
Maestro
®
Occupancy sensing switch
To power the sensing circuit, occupancy sensing switches require a small flow of
current when the load is in the OFF state. This can be accomplished by connecting the
power supply return wire to ground or to neutral.
Local codes in certain municipalities require that a neutral conductor be run to the
switch box, regardless of construction. In one particular instance, installing occupancy
sensors that use the ground wire to function is not permitted.
The MS-OPS6M2U-DV and MS-VPS6M2U products allow the installer to configure the
device to connect to either ground or neutral.
• To connect to ground, simply install the product in its "out-of-the box" condition.
• To connect to neutral, install the supplied white sleeve over the green wire.
For more information about occupancy sensing switches and the National Electrical
code, see:
www.lutron.com/TechnicalDocumentLibrary/048469.pdf
Features
• Passive infrared sensors with exclusive Lutron
®
XCT
TM
Technology for fine motion
detection
• 180° sensor field-of-view
• Up to 30 ft x 30 ft (9 m x 9 m) [900 ft
2
(81 m
2
)] major motion coverage and
20 ft x 20 ft (6 m x 6 m) [400 ft
2
(36 m
2
)] minor motion coverage
• Occupancy version can be set to Auto-ON / Auto-OFF or Manual-ON / Auto-OFF
• Vacancy version available to meet CA Title 24 requirements
• Adjustable timeout (1, 5, 15, or 30 minutes) and high/low sensitivity adjustment
• Occupancy sensing switch loads: incandescent, halogen, ELV, MLV, CFL, LED, magnetic fluorescent, electronic
fluorescent, and fan.
Models available
MS-OPS6M2U-DV
MS-VPS6M2U-DV
MS-OPS6M2U-DV
MS-VPS6M2U-DV
1
