5-1 Change the Temp , unit
℃ ℉
Use the " Set Button " to select the main function to " ",
℉
then one by one to press the " Function Button " ( 3-5,
Fig. 1 ) a while will determine the default Temp. unit to
or
℃
℉
@Press the " Function Button ", if the upper display value
show " 0 ", the default Temp. unit is
℃
@Press the " Function Button ", if the upper display value
show " 1 ", the default Temp. unit is .
℉
After the function is determined, press the " Enter Button "
( 3-4, Fig. 1 ) to confirm and save the selection data into
memory IC permanently. Press the " Esc Button " ( 3-3.
Fig. 1 ) will revert to normal display screen.
5-2 Change the data logger sampling time
Use the " Set Button " to select the main function to "
SEC ", ( SECOND ) then one by one to press the "
Function Button " ( 3-5, Fig. 1 ) a while will determine
the default Data Logger sampling time value ( seconds ).
@Press the " Function Button ", if the upper display value
show " 0 ", the Data Logger function is manual operation.
@Press the " Function Button ", if the upper display value
show " 1 ", the default Data Logger sampling time is
1 second.
@Press the " Function Button ", if the upper display value
show " 2 ", the default Data Logger sampling time is
2 seconds.
11
