1
English
Español
Français
Português
Please Read Before Installing
RF Processor
HRP5-120
Installation Instructions
Setup:
RF Processors will not function until they are
addressed and programmed. See the HomeWorks
Illumination Software online help.
Overview
HomeWorks RF Processors comprise the major
communication hub of a HomeWorks radio frequency
system. Each RF Processor will support up to 32 RF
Keypads and up to 64 RF Dimmers or RF Switches.
Each RF Processor covers approximately 2500 ft
2
(232 m
2
) of living space.
Up to four (4) Hybrid Repeaters may be used with each
RF Processor to extend the communications range of the
system.
A maximum of 16 HomeWorks Processors may be
connected together in a system.
Important Notes
Codes:
Install in accordance with all local and
national electrical codes.
Power:
Use only the adapter provided by Lutron with
the RF Processor (Lutron model # T120-15DC-9-BL).
Caution -
Using an adapter not rated for the
following specifications could damage the
processor and possibly overheat the adapter.
Environment:
Ambient operating temperature:
32–104 °F (0–40 °C), 0–90% humidity, non-condensing.
Indoor use only.
Cleaning:
To clean, wipe with a clean damp cloth.
DO
NOT
use any chemical solutions.
DO NOT
paint the RF
Processor.
Mounting: DO NOT
ground the RF Processor.
DO
NOT
mount the RF Processor in a metal enclosure.
RF Device Placement:
RF devices that are to be
controlled by the RF Processor must be located within
30 ft (9 m) of the RF Processor or a Hybrid Repeater.
The range and performance of RF devices in a
HomeWorks system is highly dependent on a variety of
complex factors such as:
• Distance between RF devices
• Geometry of the home
• Construction of walls separating RF devices
Range and performance can be adversely affected by:
• Mounting in a metal enclosure
• Mounting within 3 ft (1 m) of other RF devices
HRP5-120
Plug-in Adapter
T120-15DC-9-BL
Input: 100 – 240 V
~
50 / 60 Hz 500 mA
Output: 15 V
-
1.2 A
NEC
R
Class 2; IEC PELV
043506 Rev. A
10/2018
