background image

1

Please Read Before Installing

Installation Instructions

HD-RD

HD-RS

Overview

The HD-RD Remote Dimmer and the HD-RS Remote
Switch are for use with 

HomeWorks Maestro 

Dimmers and

Switches. 

Up to nine HD-RD Remote Dimmers may be used with a

HomeWorks

Wired or RF 

Maestro

Dimmer, and up to nine

HD-RS Remote Switches may be used with a 

HomeWorks

Wired or RF 

Maestro

Switch.

Important Notes

Codes:

Install in accordance with all local and national elec-

trical codes.

Danger: 

These controls must not be used to con-

trol equipment which is not visible from every con-
trol location. They must also not be used to con-
trol equipment which could create hazardous situ-

ations such as entrapment if operated accidentally.
Examples of such equipment which must not be operated
by these controls include (but are not limited to) motorized
gates, garage doors, industrial doors, microwave ovens,
heating pads, etc. It is the installer’s responsibility to ensure
that the equipment being controlled is visible from every
control location and that only suitable equipment is connect-
ed to these controls.

Overheat Damage:

To reduce the risk of overheating and

possibly damaging other equipment, do not install 
to control receptacles or motor-operated appliances.

Environment:

Ambient operating temperature: 

0-40°C, 32-104°F, 0-90% humidity, non-condensing. Indoor
use only. 

Spacing:

If mounting one control above another, leave at

least 4 1/2" (114mm) vertical space between them.

Wallplates:

Lutron Claro

®

and Satin Colors

TM

wallplates are

recommended for best color match and aesthetic appear-
ance. Do not paint controls or wallplates.

Cleaning:

To clean, wipe with a clean damp cloth. 

DO NOT

use any chemical cleaning solutions.

Wallboxes: 

Lutron recommends using 3-1/2" (89mm) deep

wallboxes for easier installation. Several controls may be
installed in one multigang wallbox - see Multigang
Installations (page 2).

Remotes:

Use only Lutron

®

HomeWorks Maestro

Remote

Dimmers (HD-RD) with HRD/HWD-6D, -6ND, -10D, -10ND,
and -5NE controls. Use only 

Lutron HomeWorks Maestro

Remote Switches (HD-RS) with HRD/HWD-8ANS controls.
Up to 9 HD-RD or HD-RS controls may be used with a

HomeWorks Maestro

Dimmer or Switch. Mechanical 3- or 4-

way switches will not work.

Designer-Style Maestro

® 

Remotes

HD-RD, -RS

120/127 V ~, 50/60 Hz 

Summary of Contents for HD-RD









Reviews: