Lutool LT62068, Instruction Manual

Page: 12 / 19

9.3 Switching ON/OFF (Fig .4)
Fig.4
1.
Make sure the battery pack is installed.
2. Switch the power tool on: push the ON/OFF switch
button (2) forwards onto the “
ON ” position.
3. Switch the power tool off: pull the ON/OFF switch
button backwards to the “
OFF ” position.
9.4 Mounting an accessory (tool)
Risk of injury !
To prevent switching the tool on unintentionally, remove the battery pack from the battery port of this
tool before changing the tool.
9.4.1 Mounting the sanding plate (Fig. 5)
Note: The sanding plate is fixed firmly to the Multi Function Tool and can not rotate due to the four
locating pins on the output spindle. (See below Figure 5 )
Fig 5
1. Remove the inner hexagon screw with the
Allen key (10).
2. Fit the sanding plate (8) onto the locating
pins of the output spindle firmly and fasten
using the respective inner hexagon screw.
10