Functioning
CONTROL PANEL
MANUAL OPERATION
-
In current mode press the
5
push button to enter the main MENU.
-
In the sub-menus press the
5
push button to confirm a selection.
-
Rotate the
5
knob to navigate in the main MENU and sub-menus.
-
Use the
« INTENSITY »
4
knob to adjust the
light intensity from 0 to 100%
.
-
Use the knobs
5
and
6
to adjust the light mode parameters.
-
Display
7
.
ATTENTION:
The
light intensity
level will be adjustable from
0 - 50%
if the
FAN
is
OFF
.
The value on the display flashes.
1.
Press the
5
push button to enter the main MENU.
2.
Select
MANUAL
by pressing the
5
push button.
3. Select the light mode between
CCT / HSI / RGBW / PRESET / EFFECT
with the
5
knob and
press the
5
push button to confirm selection.
4. See
LIGHT MODES.
DMX OPERATION
1.
Press the
5
push button to enter the main MENU.
2.
Select
DMX
with the
5
knob and press the
5
push button to confirm selection.
3. Select the light mode between
CCT / HSI / RGBW / FRGBW / PRESET / EFFECT
with the
5
knob and press the
5
push button to confirm selection.
4.
Select the DMX channel, use the
« »
1
and
« »
3
buttons to change DMX ADDRESS in
ascending or descending order between 1 and 512. The number shown on the display
7
is the selected channel to communicate with the control desk.
5.
See
DMX PROTOCOL MANUAL
to DMX channel specification
.
5
6
1
7
2
3
4
NOTE:
The symbol
- ! -
on the display indicates that there is
no DMX signal.
BLUETOOTH
Enable / Disable BLE App interface
