ATTENTION - Only to STROBE effect
1. The strobe effect is
AVAiLABLE ONLY IN MANUAL OPERATION.
2. The strobe effect is applied to the parameters of the last configured CCT/HSI/RGBW/
PRESET mode.
3. The STROBE effect is
NOT WORK
if TELEVISION, PAPARAZZI or LIGHTNING effects are in
functioning.
DMX OPERATION
- DMX protocol
DMX Channel Protocol - 8 bit
DMX Channel Protocol - 16 bit
CCT
CCT
1. DIMMER
1. DIMMER - byte 1
3. COLOR TEMPERATURE - byte 1
2. COLOR TEMPERATURE
2. DIMMER - byte 2
4. COLOR TEMPERATURE - byte 2
2
4
MODE
MODE
CHANNELS USED
CHANNELS USED
DMX CHANNEL POSITION
DMX CHANNEL POSITION
TELEVISION
TELEVISION
PAPARAZZI
PAPARAZZI
LIGHTNING
LIGHTNING
1. DIMMER
1. DIMMER - byte 1
4. WHITE RANGE - byte 2
1. DIMMER
1. DIMMER - byte 1
4. INTERVAL - byte 2
1. DIMMER
1. DIMMER - byte 1
4. COLOR TEMPERATURE - byte 2
2. WHITE RANGE
2. DIMMER - byte 2
5. FREQUENCY - byte 1
2. INTERVAL
2. DIMMER - byte 2
5. BULB TYPE - byte 1
2. COLOR TEMPERATURE
2. DIMMER - byte 2
5. INTERVAL - byte 1
3. FREQUENCY
3. WHITE RANGE - byte 1
6. FREQUENCY - byte 2
3. BULB TYPE
3. INTERVAL - byte 1
6. BULB TYPE - byte 2
3. INTERVAL
3. COLOR TEMPERATURE - byte 1
6. INTERVAL - byte 2
3
6
3
6
3
6
The Superpanel 60 can be used with 8 bit or 16 bit DMX control.
-
When used in
8 bit mode
it uses
one channel for each function
, the DMX values are in the
range of 0 to 255.
-
When used in 1
6 bit mode
it uses
two channels for each function
, the increased resolution
offers a smooth dimming and a more accurate color adjustment, the DMX values for the
first channel (byte 1) are in the range of 256 to 65535 while for the second channel (byte
2) they are in the range of 0 to 255.
The fixture will use the number of channels required based on the light mode selected.
The Superpanel 60 uses consecutive channels starting from the DMX address set on the
panel used as reference for the connection to the control desk. Please take the above into
consideration when using many units of Superpanel 60 to avoid overlaps.
