Functioning
CONTROL PANEL
MANUAL OPERATION
-
In current mode press the
« OK »
2
button to enter the main MENU.
-
In the sub-menus press the
« OK »
2
button to confirm a selection.
-
Use the
« »
1
or
« »
3
buttons to navigate in the main MENU and sub-menus.
-
Use the
« INTENSITY »
4
knob to adjust the
light intensity from 0 to 100%
.
-
Use the
« CTT »
5
knob to adjust the light mode parameters.
-
Display
6
.
ATTENTION:
The
light intensity
level will be adjustable from
0 - 50%
if the
FAN
is
OFF
.
The value on the display flashes.
1. Press the
« OK »
2
button to enter the main MENU.
2. Select
MANUAL
by pressing the
« OK »
2
button.
3. Select the light mode between
CCT MODE
and
EFFECT MODE
with the
« »
1
or
« »
3
button, press
« OK »
2
to confirm selection.
4.
See
LIGHT MODES.
DMX OPERATION
1. Press the
« OK »
2
button to enter the main MENU.
2. Select
DMX
with the
« »
3
button, press
« OK »
2
button to confirm selection.
3. Select the light mode between
CCT MODE
and
EFFECT MODE
with the
« »
1
or
« »
3
button, press
« OK »
2
to confirm selection.
5. Select the DMX channel, use the
« »
1
and
« »
3
buttons to change DMX ADDRESS in
ascending or descending order between 1 and 512. The number shown on the display
6
is the selected channel to communicate with the control desk.
6.
See
DMX PROTOCOL MANUAL
to DMX channel specification
.
NOTE:
The symbol
- ! -
on the display indicates that there is
no DMX signal.
1
5
6
2 3
4
