1
Silvento concealed variant clamped-ventilator
- Replaces Skalar-; Skalar-V...; Skalar-2V... -
Installation directions
- Please pass on to the user -
Ventilator installation
as extractor hood is
not permitted here
The German VDE 100
regulation permits installa-
tion in bath and shower
room area 1.
Ventilator
Area 1
Area 2
2.25 mm
Area 0
Contents:
Notes on these installation instructions
Safety precautions
Technical specifications, waste disposal
Dimensional drawings
Possible installation positions
Installation examples
Parts supplied
Dismounting „Skalar“ and installation also in new constructions
Electrical connection, wiring diagrams
Run-out setting
Filter change, cleaning
Accessory and replacement parts
Page:
1
1
2
3
3
4
5
5-7
8-9
10
10
10
Notes on these instructions
•
Read these instructions carefully and completely prior to starting installation! The general safety precautions and
safety symbols with notes in the text must be observed
•
When installation has been completed, pass these directions on to the user (renter, owner, block manager or
other)
Symbols in these directions:
Danger
! Assembly work is only to be carried out on the ventilator when it is separated from the line voltage!
The ventilator is protectively insulated to protective class II, the protective conductor is not needed!
This symbol warns on danger of injury
This symbol warns on danger of injury by electricity
Safety precautions
Caution
! Electrical connection is only to be made by authorised skilled personnel and under observance of
current VDE 0100 regulations of the German Electrical Engineering Association!
Caution
! This piece of equipment is not to be operated (filter change, cleaning) by children or persons who
cannot operate it properly because of their physical, sensorial or mental ability, or their inexperience or lack of
appropriate knowledge.
Ventilators involved in off-air exhaust must always be supplied with a functioning flow-in of outside air.