20
Room temperature:
min. 16°C max. 40°C
Outdoor temperature:
min. -15°C max. 40°C
Room humidity:
Exhaust air 65 % non-condensing
Outdoor humidity:
Not condensing in the unit or pipes
Temperature at installation site:
annual average more than 16°C, min. 12°C max. 40°C
Air humidity at the installation site:
less than 60 % rel. not condensing on the device
The installation site of the device should be protected from direct sunlight and weather.
If the device is operated, for example, under high humidity, heavy soiling, excessive stress, external
electronic influences, long downtimes or other difficult conditions, it must be approved for use, as the
standard version may not be suitable for reliable operation under such conditions.
Special Mounting Features
The ventilation unit must always be fully accessible for operation and maintenance.
To avoid vibrations, a flat and hard ceiling or wall surface is required for ceiling and wall
mounting! Only mount on ceilings and walls with sufficient load-bearing capacity (min. 200 kg/
m³)!
If the unit is installed behind a suspended ceiling, an inspection opening must be provided in the
suspended ceiling for changing the filter and for opening the unit.
The unit should generally be installed by 2 persons!
Operating Conditions
Technical Data
Unit voltage:
230 V AC 50/60 Hz
Control voltage:
1-10 V DC SELV
Specific power consumption:
0.3 W/m³/h
Maximum power consumption:
52 W
Airflow volume ranges:
50 - 80 m³/h
50 - 100 m³/h
50 - 125 m³/h
Sound power level device:
45 dB(A)
Heat provision level according to DIBt: 84 %
Heat provision level according to PHI: 83 %
Filter class:
epm1 55 % ≈ F7 ≈ MERV13
Protection class:
IP22
Weight:
24 kg
Mains connection:
NYM 3 x 1.5 mm
Control connection:
J-Y(St)Y(2 x 2 x 0.8)
Hexagon socket 4 (motors and mounting bracket (N))
Torx TX25 (housing cover)
Torx TX10 (blind cover and nozzle (B))
Spirit level, folding rule
Drill Ø 10 mm when installing in concrete or drywall
Sharp knife, saw
Required Tools
Summary of Contents for LUNOMAT
