DALI Display, Manual V1.0.6
© 2016, Lunatone Industrielle Elektronik GmbH
5.2
Scenes and Color Scenes
Scenes(S)
When pressing the „Scenes“-Button you enter the scene-oriented configuration menu, there
appropriate values can be assigned to the currently active scene of each group. Always 4 groups are
displayed on one page. Other groups can be selected using the arrow-keys in the menubar. Active
scene can be changed with “Load Scene” and settings can be stored using “Save Scene”.
The settings in the scene configuration menu are automatically sent to the ballasts. Hence an optical
feedback is given before storing a scene.
Settings
: In each group, a
brightness level
between 0-100% can be assigned to the selected scene.
Additional options are: OFF (group off) or MASK (group shall not react and keep current settings
when the scene is called). Depending on the device type of the DALI control gear,
further setting
options
are available, such as color temperature or RGB-color value (DALI DT8 devices), (these
special properties can be edited by tapping the corresponding field). The color temperature can be
entered via a keypad, for editing the color of a scene you will be redirected to the “Color Scene”
configuration menu.
Hint:
Only DT8-devices which identify themselves as color type Tc or RGBWAF are
supported.
Hint:
In mixed groups (e.g. with Tc and RGBWAF or multitype devices) the scene color
type can be selected by clicking the group name.
Active Scene
Display of Scene Number and
assigned Name
More Groups
Switch to the
configuration site of the
next 4 groups (4 sites with
4 groups on each site)
Brightness in % /
MASK /OFF
parameters (available
for each group):
-
direct arc
power (in %)
-
MASK
-
OFF
Special Scene-Settings (dependent on Device Type):
Scene values, which depend on the type of control gear, such as color or color temperature. The
special settings can be simply edited by tapping. Press group number for changing color type
ofmixed groups
Clear Color / Tc
Reset Color Scene values
(MASK)
