DALI Display, Manual V1.0.6
© 2016, Lunatone Industrielle Elektronik GmbH
5.
Commissioning
When talking about commissioning all required tasks to reach the final function are considered. This
includes DALI addressing of the electronic ballasts (luminaires) and the definition of groups and
scenes (= typical DALI-system commissioning) as well as the generation of automatic running
processes, daily and weekly scheduled and so on. Most functions of the settings menu are used for
commissioning.
5.1
Adressing/Grouping
After finishing the installation, the next step should be a communication test, to ensure that all
devices are connected correctly. Then the addressing of the control gear can be started. In the
“Addressing/Grouping” menu several functions are available.
Options:
•
System extension (search for already installed ballasts on the bus by scanning all available
DALI addresses on both DALI buses, additionally the addressing algorithm will be started for
DALI ballasts that have no short address)
•
Re-initialisation (deletes all DALI addresses, removes all DALI groups and starts a new
addressing routine. This will delete and readdress
all
ballasts on the bus)
•
Grouping only, no search for devices (existing addresses and group assignments are read out
and can be changed)
•
Communication Test for DALI-A and DALI-B (all electronic ballasts on the DALI bus are
switched on/off in an interval of 1 second)
Weekly Schedule,
Schedule List (SDLL)
Define a Daily Schedule for
each day of a week
Sequences (SQ)
Add/Remove Scenes to/from
a Timeline (20sec-24h)
Color Scenes
Define Scenes for DT8 Control
Gear with RGB-channels
Scenes (S)
Set Scene Values for
each Group
Daily Schedule
(SDL)
Add/Remove Scenes and
Sequences to/from a
Daily Timeline
Addressing and
Grouping
