Luna BCS 250P, Original Instructions Manual

Page: 38 / 118

3.3 IDENTIFYING SHIPPING BOXES BEFORE ASSEMBLY
It is advisable that before unpacking to have plenty of paper towels or cloths
available to clean off the rust preservative.
Contents of the shipment:
A. Main Table Saw
B. Sliding Beam
C. Square Frame
A
B
C
3.4. INSTALLATIONS OF LOOSE PARTS
3.4.1 Saw protection - Installation
CAUTION
The guard must always be mounted and must be positioned in such a way as
to completely cover the tool.
– Lift the saw assembly by means of the lever A after loosening the handle
B.
– Fit in protection C and tighten the handle E
3.4.2 FITTING THE SLIDING BEAM
CAUTION
The sliding beam extrusion is heavy. To avoid injury and possible damage to
the beam, please seek assistance from another person.
1. Familiarise yourself with the components of the sliding beam Fig.3.1.
1. Plunger lock assembly
2. Operating knob
3. Fixings to secure sliding beam to brackets
4. Sliding beam
2. Attach the plunger lock assembly to the sliding beam by inserting it through
the locating hole in the side of the sliding beam extrusion
and secure with the nut provided Fig 3.2.
Fig.3.1
Fig.3.2
36