Luna BBS 2000, Original Instructions Manual

Page: 18 / 48

17
Fig. 6. The iron block should be put down when the machine is in
use of flat sanding.
Fig. 7. The scale can be selected and positioned from 45° to 90° at
the desired degree by means of adjusting knob A.
Fig. 8. The surface of the internal are with the radius not less than
35 can be sand and cut on the extension table.
WARNING
For your own safety Read Instruction Manual Before Operating
Sander.
1. Wear eye protection.
2. Wear respirator.
3. Wear ear protection.
4. Support work piece with backstop or work table.
5. KEEP GUARDS IN PLACE and in working order.
6. REMOVE ADJUSTING KEYS AND WRENCHES. From
habit of checking to see that adjusting wrenches are removed
from tool before turning it on.
7. KEEP WORK AREA CLEAN. Cluttered areas and benches
invite accidents.
8. DO NOT USE IN DANGEROUS ENVIRONMENT. Do not
see power tools in damp or wet Locations, or expose them to
rain. Keep work areas well lighted.
9. KEEP CHILDREN AWAY. All visitors should be kept sage
distance from work area.
10. DO NOT FORCE TOOL. It will do the job better and safer at
the rate for which it was esigned.
11. USE RIGHT TOOL. Do not force tool or attachment to do a
job for witch it was not Designed.
Fig. 4. The sanding table can be adjusted and locked in the range
of 90° to 135°.
Fig. 5. The extension table can be adjusted and locked in the range
of 90° to 135°.