Luna 850 V GOLD GAS Instruction For Use & Installation Instructions Download Page 9

Page: 9 / 12

INSTALLATIEVOORSCHRIFT EN GEBRUIKSAANWIJZING - LUNA 1000-1300-1600 H GOLD - GAS

INSRUCTION D’INSTALLATION ET D’UTILISATION - LUNA 1000 -1300-1600 H GOLD - GAZ

M-DESIGN

5. ELECTRICAL CONNECTION

This appliance is supplied with a remote-control. Please have a 230V power point ready with an earthing device.

INSULATION AND FINISHING

Once installation is complete, the appliance can be ﬁ�ed. Before doing so, check the tightness of the gas pipe one more time. Light the appliance

and check that it is working: check the tightness of the gas pipe and the smoke pipe. Once you have checked everything, you can perform the ﬁnal

insulating and ﬁnishing operations.

The built-in part of the furnace tends to be very warm. Please check that the furnace is not too narrowly ﬁ�ed and that there is adequate space for

the elimination of hot air. For insulation of the furnace, we advise you to use M Design insulating plates. You are advised against using any other

insulation product. Inﬂammable materials as well may not be used for the ﬁnishing.

The enclosure of the furnace must be provided with ventilation grills or openings allowing for the elimination of heat by convection. It is possible

to have a convection kit ﬁ�ed with the furnace. This system directs the heat inside the room by means of ﬂexible tubes.

For the elimination of hot air and the entry of warm air we advise you to use the Design grills by M-Design.

The masonry must be raised around the furnace. Because of the expansion of the furnace during combustion, an interstice of at least 2mm must

be provided on each side of the appliance. The masonry must not lean against the furnace

Summary of Contents for 850 V GOLD GAS












