INSTALLATIEVOORSCHRIFT EN GEBRUIKSAANWIJZING - LUNA 1000-1300-1600 H GOLD - GAS
INSRUCTION D’INSTALLATION ET D’UTILISATION - LUNA 1000 -1300-1600 H GOLD - GAZ
M-DESIGN
11
8. FIRST-TIME USE
The masonry and plaster surrounding a recently installed furnace hold a great deal of moisture, which must first evaporate before commissioning the
appliance. If not, the plaster may crack or split. Ask your installer about the timescale to follow. The first time you use it, only make a moderate-sized
fire.
The first few times the furnace is used, an unpleasant odour may be apparent. It comes from the protective paintwork. These emissions are totally
harmless. To quickly get rid of these odours, all you need to do is ventilate the room for a while.
After the first few fires, a light deposit may appear on the window. It comes from the paintwork. Once the furnace is cold you can get rid of this de-
posit by using M Design’s Bio-Clean cleaning product. This product may be used later on for cleaning the window.
The appliance must not be used if the door no longer has a window or with the door open. If the window is broken or cracked, the appliance must
not be used until the window has been replaced. Contact your M Design reseller.
9. SAFETY, ADVICE AND MAINTENANCE
Have your furnace inspected once a year by a qualified technician.
Please observe the following points:
•
Closed appliances produce intense heat, which means that all the surfaces of the external walls (metal, door frames and windows) become very
hot once a certain temperature is reached. Make sure that young children do not touch the window; this could result in severe burns.
•
The logs, ceramic pebbles, a Diamond set and a Sapphire set are delivered with the furnace. Never put other objects in the flames!
•
Keep inflammable materials a suitable distance from the furnace (min. 1m)!
•
Never modify the se�ings yourself! The furnace warranty will then be considered as invalid, null and void.
•
Never let children use the remote control without supervision.
•
Always leave the pilot light on. The appliance is designed in order that the pilot light goes out automatically every 24 hours and lights in-
stantly. This enables the electronic system to run down from static electricity.
•
In the case where the burner goes out for any reason, wait for 3 minutes before relighting the furnace.
